Equipment operation
114
(5) Push the snap button and extend each
rear support pole to the long position.
1
Rear support pole
2
Snap button
3
Short position
4
Middle position
5
Long position
(6) Secure each rear support pole to the rear
support pole mounting bracket using the
lock pin.
1
Rear support pole
2
Lock pin
3
Rear support pole mounting bracket
(7) While pulling the main pole down, push
the snap button and shorten each rear
support pole to either the middle position
for cruising or to the short position if you
are using the wakeboard tower. Be sure
the snap buttons click into place.
1
Rear support pole
2
Short position
3
Middle position
4
Snap button
NOTICE
Do not exceed 72 km/h (45 mph) with the
bimini top in the up position.
Be careful not to push the snap button
and extend the pole too far. Otherwise,
the lower section of the pole could fall
into the water.
1
2
3
4
5
2
3
1
1
2
3
4
SportsBoat_F3R13.book Page 114 Friday, May 31, 2019 9:42 AM
Downloaded from