manualshive.com logo in svg

Yamaha APEX RX10RY, Руководство пользователя

"Yamaha APEX RX10RY" - автомобильный ручной каталог владельца, который можно бесплатно скачать с нашего вебсайта. Этот руководство поможет вам освоить все функции и возможности вашего автомобиля Yamaha APEX RX10RY. Не забудьте скачать его с manualshive.com.

Поделиться
Скачать
background image

Control functions

13

TIP

The snowmobile must be stopped on a level
surface to obtain an accurate fuel meter read-
ing, since the reading changes according to
the movement and inclination of the snowmo-
bile.

Grip/thumb warmer level indicator

When the grip warmer adjustment switch is
pressed, the grip warmer indicator comes on
and the display switches to the grip warmer
level.
When the thumb warmer adjustment switch is
pressed, the thumb warmer indicator comes
on and the display switches to the thumb
warmer level.
See  “Grip/thumb warmer adjustment switch”
on page 15 for detailed information.

TIP

●

The grip/thumb warmer level is displayed
for 5 seconds after releasing the grip/thumb
warmer adjustment switch, then the display
switches to the fuel meter.

●

The top segment of the grip/thumb warmer
level indicator flashes once when the
grip/thumb warmer adjustment reaches the
maximum level. The bottom segment of the
grip/thumb warmer level indicator flashes
once when the grip/thumb warmer adjust-
ment reaches the minimum level.

●

When the engine is started, the grip/thumb
warmer levels are set to the levels selected
when the engine was last stopped.

ESU10451

Fuel level warning 
indicator “ ” 

The fuel level warning indicator indicates a
malfunctioning sensor, disconnected coupler,
broken lead, or short circuit when detected by
the self-diagnosis device of the snowmobile.
The fuel level warning indicator, warning light,
and all segments of the fuel meter warn the
rider of the above problems by flashing con-
tinuously.
If this occurs, have a Yamaha dealer inspect
the snowmobile as soon as possible.

1. Grip warmer indicator “

”

2. Thumb warmer indicator “

”

1. Grip warmer adjustment switch

1. Thumb warmer adjustment switch

U8FP14E0.book  Page 13  Friday, March 28, 2008  6:37 PM

Содержание APEX RX10RY

































































































Отзывы:

Нет отзывов

Похожие инструкции для APEX RX10RY

Бренды по названию

Популярные бренды

Загрузить еще бренды