Control functions
10
●
a digital speedometer (which shows the
riding speed)
●
a tachometer (which shows engine speed)
●
an odometer (which shows the total dis-
tance traveled)
●
two tripmeters (which show the distance
traveled since they were last set to zero)
●
a barometer (which shows the ambient
barometric pressure)
●
a clock
●
warning indicators (which show self-diag-
nosis, coolant temperature, fuel level, and
oil level warnings)
●
indicator lights (which show high beam and
low coolant temperature conditions)
●
a warning light (which shows warnings to-
gether with the warning indicators)
●
a fuel meter (which shows the fuel remain-
ing in the fuel tank)
●
a grip/thumb warmer level indicator (which
shows the grip warmer level or the thumb
warmer level)
●
a display brightness control function
After the engine is started, the tachometer
makes one sweep, and the low coolant tem-
perature indicator light, the warning light, and
all segments of the meter display turn on and
off once.
The grip warmer level is initially displayed for
5 seconds, then the display switches to the
fuel meter.
Odometer, tripmeter, and barometer
modes
Pushing the “SELECT” button switches the
display between the odometer mode “ODO”,
tripmeter modes “TRIP A” and “TRIP B”, and
barometer mode “BARO”.
To reset a tripmeter, push the “RESET” button
for at least 1 second while the tripmeter is dis-
played.
TIP
●
To switch the speedometer, odometer, and
tripmeter displays between kilometers and
miles, select the odometer mode “ODO”,
and then push the “SELECT” button for at
least 10 seconds while the snowmobile is
stopped.
●
To switch the barometer display between
hectopascal “hPa” and inches of mercury
“inHg”, select the barometer mode “BARO”,
and then push the “SELECT” button for at
least 3 seconds while the snowmobile is
stopped.
1. Tachometer
2. Low coolant temperature indicator
light “
”
3. Warning light “
”
4. Meter display
1. “SELECT” button
U8FP14E0.book Page 10 Friday, March 28, 2008 6:37 PM
