Before starting inspection, refer to version.txt in the same directory as the firmware shown on the previous page and input the
version character string as instructed.
(Please refer to page 23, 24)
B. Inspection Method
The inspection configuration is shown in the diagram below.
Install the inspection jig to the AO8 to be inspected as in the figure above. Send the inspection commands from the PC via the AI8 to the
LMY-slot inspection jig and take in at the PC the results returned from the LMY-slot inspection jig.
* Turn on the power supply for AI8 before making the connection between the AI8 on the jig side and the jig for serial
communication. Warning: Do not connect until
"
"
is displayed on the AI8 7-segment display.
* Use the LMY-slot inspection jigs inserted into the LMY-slots. For details, see the LMY-slot inspection jig
specifications.
* Serial communications jigs are boards that convert the serial interface from the PC. For details, see the LMY-slot
inspection jig specifications.
* Set the DIP switches on the ID change jig for AO8 inspection as shown below. For details on the IC change jig, see
the LMY-slot inspection jig specifications.
The AO8 is inspected using PC inspection software. This inspection software is common for AI8/AO8/DSP1D/CS1D. For the basic
operation methods, menu screen specifications, etc., see the CS1D Test Program Specifications.
Below is the menu for AO8 inspection.
Input the latest version of AO8 UNC before starting the inspection. (This is necessary for the version check.) For the character string
to input, refer to version.txt in the same directory as the AI8/AO8 firmware. Details of each check item and the corresponding PC
software are shown on the following pages.
PM1D inspection PC software summary
Software used:
PM1D inspection PC software in PM1D system software
Version used:
PM1D system software component files with the version number listed on the cover sheet.
(Managed with the already drawn CD-R assembly drawing (3JL-XY714A0).)
Method of preparation:
Follow the instructions in the CS1D test program specifications (Drawing No: KES-92654) titled
"Procedure for extracting software groups for production and customer service applications".
Once the files have been extracted, refer to the Readme.txt in the FactoryDiag directory.
PM1D inspection PC software summary
Software used:
PM1D inspection PC software in PM1D system software
Version used:
PM1D system software component files with the version number listed on the cover sheet.
(Managed with the already drawn CD-R assembly drawing (3JL-XY714A0).)
Method of preparation:
Follow the instructions in the CS1D test program specifications (Drawing No: KES-92654) titled
"Procedure for extracting software groups for production and customer service applications".
Once the files have been extracted, refer to the Readme.txt in the FactoryDiag directory.
PM1D inspection PC software summary
Software used:
PM1D inspection PC software in PM1D system software
Version used:
PM1D system software component files with the version number listed on the cover sheet.
(Managed with the already drawn CD-R assembly drawing (3JL-XY714A0).)
Method of preparation:
Follow the instructions in the CS1D test program specifications (Drawing No: KES-92654) titled
"Procedure for extracting software groups for production and customer service applications".
Once the files have been extracted, refer to the Readme.txt in the FactoryDiag directory.
PM1D inspection PC software summary
Software used:
PM1D inspection PC software in PM1D system software
Version used:
PM1D system software component files with the version number listed on the cover sheet.
(Managed with the already drawn CD-R assembly drawing (3JL-XY714A0).)
Method of preparation:
Follow the instructions in the CS1D test program specifications (Drawing No: KES-92654) titled
"Procedure for extracting software groups for production and customer service applications".
Once the files have been extracted, refer to the Readme.txt in the FactoryDiag directory.
PC
x 8
SERIAL
68-pin
port connection
change
68-pin
W.CLK I/O
IN
OUT
OUT
IN
SLOT1
UNC
BNC
W.CLK I/O
A
AO8 inspection jig
DSA-1
AO8
AI8
LMY-slot
inspection jig
LMY-slot
inspection jig
Serial
communications jig
LMY-slot
inspection jig
ID
change jig
Oscilloscope
Jitter meter
This connection
is changed.
For jitter measurement, use either according
to the Overall Inspection Specifications.
PC
x 8
SERIAL
68-pin
port connection
change
68-pin
W.CLK I/O
IN
OUT
OUT
IN
SLOT1
UNC
BNC
W.CLK I/O
A
AO8 inspection jig
DSA-1
AO8
AI8
LMY-slot
inspection jig
LMY-slot
inspection jig
Serial
communications jig
LMY-slot
inspection jig
ID
change jig
Oscilloscope
Jitter meter
This connection
is changed.
For jitter measurement, use either according
to the Overall Inspection Specifications.
PC
x 8
SERIAL
68-pin
port connection
change
68-pin
W.CLK I/O
IN
OUT
OUT
IN
SLOT1
UNC
BNC
W.CLK I/O
A
AO8 inspection jig
DSA-1
AO8
AI8
LMY-slot
inspection jig
LMY-slot
inspection jig
Serial
communications jig
LMY-slot
inspection jig
ID
change jig
Oscilloscope
Jitter meter
This connection
is changed.
For jitter measurement, use either according
to the Overall Inspection Specifications.
PC
x 8
SERIAL
68-pin
port connection
change
68-pin
W.CLK I/O
IN
OUT
OUT
IN
SLOT1
UNC
BNC
W.CLK I/O
A
AO8 inspection jig
DSA-1
AO8
AI8
LMY-slot
inspection jig
LMY-slot
inspection jig
Serial
communications jig
LMY-slot
inspection jig
ID
change jig
Oscilloscope
Jitter meter
This connection
is changed.
For jitter measurement, use either according
to the Overall Inspection Specifications.
PC
x 8
SERIAL
68-pin
port connection
change
68-pin
W.CLK I/O
IN
OUT
OUT
IN
SLOT1
UNC
BNC
W.CLK I/O
A
AO8 inspection jig
DSA-1
AO8
AI8
LMY-slot
inspection jig
LMY-slot
inspection jig
Serial
communications jig
LMY-slot
inspection jig
ID
change jig
Oscilloscope
Jitter meter
This connection
is changed.
For jitter measurement, use either according
to the Overall Inspection Specifications.
PC
x 8
SERIAL
68-pin
port connection
change
68-pin
W.CLK I/O
IN
OUT
OUT
IN
SLOT1
UNC
BNC
W.CLK I/O
A
AO8 inspection jig
DSA-1
AO8
AI8
LMY-slot
inspection jig
LMY-slot
inspection jig
Serial
communications jig
LMY-slot
inspection jig
ID
change jig
Oscilloscope
Jitter meter
This connection
is changed.
For jitter measurement, use either according
to the Overall Inspection Specifications.
PC
x 8
SERIAL
68-pin
port connection
change
68-pin
W.CLK I/O
IN
OUT
OUT
IN
SLOT1
UNC
BNC
W.CLK I/O
A
AO8 inspection jig
DSA-1
AO8
AI8
LMY-slot
inspection jig
LMY-slot
inspection jig
Serial
communications jig
LMY-slot
inspection jig
ID
change jig
Oscilloscope
Jitter meter
This connection
is changed.
For jitter measurement, use either according
to the Overall Inspection Specifications.
PC
x 8
SERIAL
68-pin
port connection
change
68-pin
W.CLK I/O
IN
OUT
OUT
IN
SLOT1
UNC
BNC
W.CLK I/O
A
AO8 inspection jig
DSA-1
AO8
AI8
LMY-slot
inspection jig
LMY-slot
inspection jig
Serial
communications jig
LMY-slot
inspection jig
ID
change jig
Oscilloscope
Jitter meter
This connection
is changed.
For jitter measurement, use either according
to the Overall Inspection Specifications.
SW 101
1
2
3
4
5
6
7
8
ID change jig DIP switch settings
SW 102
1
2
3
4
5
6
7
8
ON
SW 200
1
2
3
4
1
2
3
4
5
6
7
8
ON
ON
MSB/LSB Line = Has been fixed at the low level.
MSB/LSB Line = Has been set as by pull amp as is.
2CH/4CH Line = Has been fixed at the low level.
2CH/4CH Line = Has been set as by pull amp as is.
1
2
3
4
In each inspection item, if there are instruc-
tions to drop to the low level, set the relev-
ant switches to ON.
SW 101
1
2
3
4
5
6
7
8
ID change jig DIP switch settings
SW 102
1
2
3
4
5
6
7
8
ON
SW 200
1
2
3
4
1
2
3
4
5
6
7
8
ON
ON
MSB/LSB Line = Has been fixed at the low level.
MSB/LSB Line = Has been set as by pull amp as is.
2CH/4CH Line = Has been fixed at the low level.
2CH/4CH Line = Has been set as by pull amp as is.
1
2
3
4
In each inspection item, if there are instruc-
tions to drop to the low level, set the relev-
ant switches to ON.
SW 101
1
2
3
4
5
6
7
8
ID change jig DIP switch settings
SW 102
1
2
3
4
5
6
7
8
ON
SW 200
1
2
3
4
1
2
3
4
5
6
7
8
ON
ON
MSB/LSB Line = Has been fixed at the low level.
MSB/LSB Line = Has been set as by pull amp as is.
2CH/4CH Line = Has been fixed at the low level.
2CH/4CH Line = Has been set as by pull amp as is.
1
2
3
4
In each inspection item, if there are instruc-
tions to drop to the low level, set the relev-
ant switches to ON.
SW 101
1
2
3
4
5
6
7
8
ID change jig DIP switch settings
SW 102
1
2
3
4
5
6
7
8
ON
SW 200
1
2
3
4
1
2
3
4
5
6
7
8
ON
ON
MSB/LSB Line = Has been fixed at the low level.
MSB/LSB Line = Has been set as by pull amp as is.
2CH/4CH Line = Has been fixed at the low level.
2CH/4CH Line = Has been set as by pull amp as is.
1
2
3
4
In each inspection item, if there are instruc-
tions to drop to the low level, set the relev-
ant switches to ON.
SW 101
1
2
3
4
5
6
7
8
ID change jig DIP switch settings
SW 102
1
2
3
4
5
6
7
8
ON
SW 200
1
2
3
4
1
2
3
4
5
6
7
8
ON
ON
MSB/LSB Line = Has been fixed at the low level.
MSB/LSB Line = Has been set as by pull amp as is.
2CH/4CH Line = Has been fixed at the low level.
2CH/4CH Line = Has been set as by pull amp as is.
1
2
3
4
In each inspection item, if there are instruc-
tions to drop to the low level, set the relev-
ant switches to ON.
SW 101
1
2
3
4
5
6
7
8
ID change jig DIP switch settings
SW 102
1
2
3
4
5
6
7
8
ON
SW 200
1
2
3
4
1
2
3
4
5
6
7
8
ON
ON
MSB/LSB Line = Has been fixed at the low level.
MSB/LSB Line = Has been set as by pull amp as is.
2CH/4CH Line = Has been fixed at the low level.
2CH/4CH Line = Has been set as by pull amp as is.
1
2
3
4
In each inspection item, if there are instruc-
tions to drop to the low level, set the relev-
ant switches to ON.
SW 101
1
2
3
4
5
6
7
8
ID change jig DIP switch settings
SW 102
1
2
3
4
5
6
7
8
ON
SW 200
1
2
3
4
1
2
3
4
5
6
7
8
ON
ON
MSB/LSB Line = Has been fixed at the low level.
MSB/LSB Line = Has been set as by pull amp as is.
2CH/4CH Line = Has been fixed at the low level.
2CH/4CH Line = Has been set as by pull amp as is.
1
2
3
4
In each inspection item, if there are instruc-
tions to drop to the low level, set the relev-
ant switches to ON.
SW 101
1
2
3
4
5
6
7
8
ID change jig DIP switch settings
SW 102
1
2
3
4
5
6
7
8
ON
SW 200
1
2
3
4
1
2
3
4
5
6
7
8
ON
ON
MSB/LSB Line = Has been fixed at the low level.
MSB/LSB Line = Has been set as by pull amp as is.
2CH/4CH Line = Has been fixed at the low level.
2CH/4CH Line = Has been set as by pull amp as is.
1
2
3
4
In each inspection item, if there are instruc-
tions to drop to the low level, set the relev-
ant switches to ON.
AO8
23
