INSTRUMENT AND CONTROL FUNCTIONS
4-13
1
2
3
4
5
6
7
8
9
10
11
12
EAU15404
Auxiliary DC jack
NOTICE
ECA13071
The accessories connected to the
auxiliary DC jack should not be used
with the engine turned off, and their
combined load must never exceed 6
A or 72 W, otherwise the battery may
discharge.
The auxiliary DC jack is located on the
front carrier.
12-V accessories connected to this
jack can be used when the key is in the
“ON” position and should only be used
when the engine is running.
Refer to the following chart for correct
usage.
Amperage chart
To use the auxiliary DC jack
1. Turn the key to “OFF”.
2. Remove the dust cap from the re-
ceptacle.
3. Insert the accessory plug into the
receptacle and secure it with the
screw-on cap.
4. Turn the key to “ON”, and then
start the engine. (See page 6-1.)
5. When the auxiliary DC jack is not
being used, make sure that the
dust cap is installed onto the re-
ceptacle for protection.
1. Auxiliary DC jack
2. Dust cap
1
2
Idling speed
Headlight/taillight “ON”
12 V, 3 A
Headlight/taillight “OFF”
12 V, 6 A
U53C23E0.book 13 ページ 2014年1月22日 水曜日 午後2時7分