Yamaha AG08, Руководство пользователя

Страница: 60 / 83

Assigning audio files to the sound pad
You can import audio files from your computer or iPad in .wav, .flac or .mp3 format to this unit, adjust the
length and assign them to the SOUND PAD [1]–[6] buttons on the top panel.
Select the pad to configure in the upper left part of the PAD SETTINGS screen, and press the [ ] button in
the “waveform view” field to display the screen shown below.
Press the [Import File] button to select an audio file and import the data into the AG08 Controller app. Use
the onscreen controls to adjust the length of the audio file, and press the [Send to AG] button to send the
data to the AG08. You can adjust the length and trim (delete) the silence at the beginning and end of the
recorded data, both for audio files saved on your computer or iPad and for data saved on the AG08.
NOTE
(
You cannot operate the [SOUND PAD] [1]–[6] buttons on the AG08 while data is being sent. Do not turn off the AG08, quit the AG08
Controller app or unplug the USB cable while data is being sent.
(
Audio files that are longer than 30 minutes cannot be imported.
(
A maximum of five seconds of linear PCM data (16-bit, 48 kHz) is saved on the AG08.
60
Using the sound pad > Assigning audio files to the sound pad