PERIODIC MAINTENANCE AND ADJUSTMENT
7-30
7
4. Insert a new bulb into the socket.
ECAU0080
NOTICE
_
If a turn signal light bulb of different
wattage than recommended is used,
the turn signal light flashing may be
affected.
_
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the cowlings.
EAUU1250
Replacing the tail/brake light
bulb or a rear turn signal light
bulb
Place the vehicle on the centerstand.
Tail/brake light bulb
1. Open the seat. (See page 4-9 for
seat opening and closing proce-
dures.)
2. Remove panel C. (See page 7-7
for panel removing and installing
procedures.)
3. Remove the tail/brake light bulb
socket by turning it counterclock-
wise.
4. Remove the burnt-out bulb from
the socket by pushing it in and
turning it counterclockwise.
5. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
ECAU0090
NOTICE
_
If a taillight bulb of different wattage
than recommended is used, it may
cause the battery to discharge or af-
fect the taillight lighting.
_
6. Install the socket into its original
position.
7. Install the panel, and then securely
close the seat.
1. Front turn signal light bulb
2. Auxiliary light bulb
ZAUU0098
1. Tail/brake light bulb socket
ZAUU0099
1. Tail/brake light bulb
ZAUU0100
20BF8199E2.book Page 30 Monday, February 28, 2011 10:46 AM