PERIODIC MAINTENANCE AND ADJUSTMENT
7-14
7
3. Remove the V-belt air filter case
cover by removing the bolts.
4. Remove the V-belt case air filter
element by pulling it out.
5. Clean the element with solvent,
and then squeeze the remaining
solvent out.
6. Check the element for damage
and replace it if necessary.
7. Apply oil of the recommended type
to the entire surface of the ele-
ment, and then squeeze the ex-
cess oil out.
WARNING! Use only
a dedicated parts cleaning sol-
vent. To avoid the risk of fire or
explosion, do not use gasoline
or solvents with a low flash
point.
[EWA10431]
NOTICE:
To avoid
damaging the air filter element,
handle it gently and carefully,
and do not twist it.
[ECA10521]
TIP
_
The element should be wet but not
dripping.
_
8. Install the element into the filter
case.
9. Place the air filter case cover in its
original position, and then install
the bolts and tighten the screw
clamp.
NOTICE:
Make sure that
each filter element is properly
seated in its case. The engine
should never be operated with-
out the filter elements installed,
1. V-belt case air filter cover
2. Bolt (
✕
2)
3. Clamp
1. V-belt case air filter inner cover
2. Bolt (
✕
4)
ZAUU0069
ZAUU0070
1. V-belt air filter element
ZAUU0071
Recommended oil:
Yamaha foam air filter oil or other
quality foam air filter oil
ZAUU0072
20BF8199E2.book Page 14 Monday, February 28, 2011 10:46 AM