background image

7

CLP-880/860/840/820/820S

The Control Panel

5

[TRANSPOSE] Button

The [TRANSPOSE] button allows access to the

Clavinova’s TRANSPOSE function (to shift the
pitch of the entire keyboard up or down in semitone
intervals).

6

[REVERB] Button

The [REVERB] button selects a number of

digital reverb effects that you can use for extra depth
and expressive power. See page 18 for details.

7

[EFFECT] Button (CLP-880/860/840)

This button selects a number of effects which can

give your sound greater depth and animation.

8

[TOUCH] Button

The [TOUCH] button makes it easy to adjust the

touch response of the Clavinova to match your
playing style. See page 21 for details.

9

Voice Selectors & [VARIATION] Button

Simply press any of the voice selectors to select

the corresponding voice. The voice selector LED
will light to indicate which voice is currently se-
lected. Press the [VARIATION] button so that its
indicator lights to select a variation of the currently
selected voice.

There is also a dual mode in which two voices

can be played simultaneously across the full range of
the keyboard (see page 16 for details), and a split
mode on the CLP-880/860 which allows different
voices to be played by the left and right hands (see
page 17 for details).

0

[SPLIT] Button (CLP-880/860)

Engages the split mode, in which different voices

can be played on the left- and right-hand sections of
the keyboard. See page 17 for details.

!

[METRONOME] Button

Turns the metronome sound on and off. The

[TEMPO 

/

] buttons, below, are used to set the

tempo of the metronome sound. The [–/NO] and [+/
YES]
 buttons are used to change the time signature
(beat) of the metronome if used while the [METRO-
NOME]
 button is held — page 23.

@

[TEMPO 

/

] (FUNCTION 

<

/

>

) Buttons

These buttons adjust the tempo of the metronome

function as well as the playback tempo of the re-

corder function. The tempo range is from 32 to 280
beats per minute — page 23. These same buttons are
also used to select functions — page 27.

#

[FUNCTION] Button

This button accesses a range of utility functions

— including the MIDI functions — that significantly
enhance versatility and playability. See page 27 for
details.

$

[PIANO SONG] Button

This button enters the Piano Song Mode. While

in this mode you can use the [SONG SELECT 

/

] buttons to select from 50 songs.

%

[SONG SELECT 

/

] (–/NO, +/YES) Buttons

These buttons select a piano song number for

playback, and are also used to adjust a range of other
parameters (i.e. their “–/NO” and “+/YES” func-
tions).

^

RECORDER [START/STOP] and [REC] But-
tons

These buttons control the Clavinova’s recorder,

letting you record and play back just about anything
you play on the keyboard.

&

RECORDER [1] and [2] Buttons

The Clavinova has a 2-track recorder, and these

buttons are used to select the track(s) to be recorded
or played back. See page 24 for details.

*

Pedals

The soft (left), sostenuto (center) and damper

(right) pedals (soft/sostenuto [left] and damper
[right] in the case of the CLP-820S) provide a range
of expressive control capabilities similar to the pedal
functions on an acoustic piano. See page 20 for
details.

*

Soft pedal

Damper pedal

Sostenuto pedal

*

Soft/Sostenuto pedal

Damper pedal

CLP-880/860/840/820

CLP-820S

Содержание 820S









































































Отзывы: