Yamaha 5GJ5, Дополнительное руководство по обслуживанию

Страница: 19 / 40

–13–
AA Pass the speed sensor lead under the stay and
cross pipe and then over the brake hose guide.
AB Route the lean angle cut-off switch lead through
the back of the mirror stay (cross pipe).
AC Route the fuse box lead above the starter motor
lead.
AD Route the battery positive lead through the under
the seat lock cable.
AE To the switch on the seat hinge.
U Align the plastic clamp with the white tape on the
wireharness and fasten to the frame.
V Fasten the wireharness and seat lock cable to the
frame with a plastic clamp.
W Pass the wireharnesses past the outside of the
frame bracket.
X Apply silicone grease when inserting the starter
relay.
Y Fasten the wireharness to the frame with a plastic
clamp.
Z Use a plastic band to hold the auto choke leads (left
and right), throttle position sensor lead, and rear
brake hose in a loose bandle. (The band should be
loose enough so that it can be moved.)
Pull the band end to the bottom.
CABLE ROUTING
SPEC