background image

Operation

30

EMU27451

Operating engine

EMU27466

Sending fuel (portable tank)

WARNING

EWM00420

Before starting the engine, make sure
that the boat is tightly moored and that
you can steer clear of any obstructions.
Be sure there are no swimmers in the
water near you.

When the air vent screw is loosened,
gasoline vapor will be released. Gaso-
line is highly flammable, and its vapors
are flammable and explosive. Refrain
from smoking, and keep away from
open flames and sparks while loosening
the air vent screw.

This product emits exhaust gases which
contain carbon monoxide, a colorless,
odorless gas which could cause brain
damage or death when inhaled. Symp-
toms include nausea, dizziness, and
drowsiness. Keep cockpit and cabin ar-
eas well ventilated. Avoid blocking ex-
haust outlets.

1.

If there is an air vent screw on the fuel
tank cap, loosen it 2 or 3 turns.

2.

If there is a fuel joint on the motor, firmly
connect the fuel line to the joint. Then
firmly connect the other end of the fuel
line to the joint on the fuel tank.

TIP:

Wipe up any spilled gasoline immediately with
dry rags. Dispose rags properly according to
local laws or regulations.
3.

Squeeze the primer pump, with the arrow
pointing up, until you feel it become firm.
During engine operation place the tank
horizontally, otherwise fuel cannot be
drawn from the fuel tank.

1. Arrow

ZMU02024

U6E028E0.book  Page 30  Tuesday, February 10, 2009  3:19 PM

Содержание 5C



































































Отзывы: