Yamaha 2XJ-AE3, Руководство по обслуживанию

Страница: 34 / 75

– 26 –
CHAS
FRONT AND REAR BRAKES
3.Remove:
●
Brake pads
1
(with pad shim
2
)
●
Pad spring
3
4.Measure:
●
Brake pad wear limit
a
Out of specification
→
Replace the brake
pads as a set.
NOTE:
When pad replacement is required, also
replace the pad spring and shim.
Wear limit
a
:
1.0 mm (0.04 in)
3
2
1
a
5.Install:
●
Pad shim
(onto inside brake pad)
●
Pad spring
●
Brake pads
*****************************************************
Installation steps:
●
Connect a suitable hose
1
tightly to the cali-
per bleed screw
2
. Put the end of this hose
into an open container.
●
Loosen the caliper bleed screw, using a fin-
ger, push the caliper piston into the brake
caliper.
●
Tighten the caliper bleed screw
2
.
●
Install the pad shim
3
onto the brake pad
4
.
NOTE:
The arrow mark
a
on the pad shim must point
in the direction of the disc rotation.
●
Install the pad spring and brake pads.
*****************************************************
T
R
.
.
Caliper bleed screw:
6 Nm (0.6 m • kg, 4.3 ft • lb)
1
2
3
4
a