Yamaha 2011 WaveRunner FZR Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 112

background image

Safety information

16

EJU30920

Watercraft characteristics

●

Jet thrust turns the watercraft. Releasing
the throttle lever completely produces only
minimum thrust. If you are traveling at
speeds above trolling, you will have rapidly
decreasing ability to steer without throttle.
This model is equipped with the Yamaha
Engine Management System (YEMS) that
includes an off-throttle steering (OTS) sys-
tem. It will activate at planing speeds should
you attempt to steer the watercraft after re-
leasing the throttle lever. The OTS system
assists in turning by continuing to supply
some thrust while the watercraft is deceler-
ating, but you can turn more sharply if you
apply throttle while turning the handlebars.
The OTS system does not function below
planing speeds or when the engine is off.
Once the engine slows down, the watercraft
will no longer turn in response to handlebar
input until you apply throttle again or you
reach trolling speed.
Practice turning in an open area without ob-
stacles until you have a good feel for this
maneuver.

●

This watercraft is water-jet propelled. The
jet pump is directly connected to the engine.
This means that jet thrust will produce some
movement whenever the engine is running.
There is no “neutral” position. You are in ei-
ther “forward” or “reverse”, depending upon
the shift lever position.

●

Do not use the reverse function to slow
down or stop the watercraft as it could
cause you to lose control, be ejected, or im-
pact the handlebars.
This could increase the risk of back/spinal
injury (paralysis), facial injuries, and broken
legs, ankles, and other bones. You could
also damage the shift mechanism.

●

Reverse can be used to slow down or stop
during slow-speed maneuvering, such as
when docking. Once the engine is idling,
shift into reverse and gradually increase en-
gine speed. Make sure that there are no ob-
stacles or people behind you before shifting
into reverse.

●

Keep away from the intake grate while the
engine is on. Items such as long hair, loose
clothing, or PFD straps can become entan-
gled in moving parts, resulting in severe in-
jury or drowning.

●

Never insert any object into the jet thrust
nozzle while the engine is running. Severe
injury or death could result from coming in
contact with the rotating parts of the jet
pump.

●

Stop the engine and remove the clip from
the engine shut-off switch before removing

1

Intake grate

2

Jet thrust nozzle

1

2

UF2R12E0.book Page 16 Tuesday, July 6, 2010 9:21 AM

«
...
19
20
21
22
23
...
»

Содержание 2011 WaveRunner FZR

















































































































Отзывы:

Нет отзывов

Похожие инструкции для 2011 WaveRunner FZR

Бренд: Sea Eagle Страницы: 8

Бренд: Boston Whaler Страницы: 161

Bavaria 37 2017 Jitterbug

Бренд: Horizon Yacht Charters Страницы: 27

Бренд: Boston Whaler Страницы: 98

Бренд: Grand Banks Страницы: 51

Бренд: Grady-White Boats Страницы: 66

Бренд: Grady-White Boats Страницы: 91

WaveRunner GP800R

Бренд: Yamaha Страницы: 24

Бренд: Yamaha Страницы: 110

WaveRunner V1 2016

Бренд: Yamaha Страницы: 104

WaveRunner GP1800 2017

Бренд: Yamaha Страницы: 106

WaveRunner SUV SV1200X

Бренд: Yamaha Страницы: 125

Бренд: Bavaria Страницы: 26

Бренд: Dehler Страницы: 63

Бренд: J/Boats Страницы: 58

Бренд: Jeanneau Страницы: 74

MERRY FISHER 585

Бренд: Jeanneau Страницы: 62

Бренд: Yamaha Страницы: 102

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды