Yamaha 2008 V-Star 1300 Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 90

background image

PERIODIC MAINTENANCE AND MINOR REPAIR

6-14

6

EAU32652

Tires

To maximize the performance, durabil-
ity, and safe operation of your motor-
cycle, note the following points
regarding the specified tires.

Tire air pressure

The tire air pressure should be checked
and, if necessary, adjusted before each
ride.

WARNING

EWA10500

●

The tire air pressure must be
checked and adjusted on cold
tires (i.e., when the temperature
of the tires equals the ambient
temperature).

●

The tire air pressure must be ad-
justed in accordance with the
riding speed and with the total
weight of rider, passenger, car-
go, and accessories approved
for this model.

WARNING

EWA11020

Because loading has an enormous
impact on the handling, braking,
performance and safety characteris-
tics of your motorcycle, you should
keep the following precautions in
mind.

●

NEVER OVERLOAD THE
MOTORCYCLE! Operation of an
overloaded motorcycle may re-
sult in tire damage, loss of con-
trol, or severe injury. Make sure
that the total weight of rider,

passenger, cargo, and accesso-
ries does not exceed the speci-
fied maximum load for the
vehicle.

●

Do not carry along loosely
packed items, which can shift
during a ride.

●

Securely pack the heaviest
items close to the center of the
motorcycle and distribute the
weight evenly on both sides.

●

Adjust the suspension and tire
air pressure with regard to the
load.

●

Check the tire condition and air
pressure before each ride.

Tire air pressure (measured on cold
tires):

0–90 kg (0–198 lb):

Front:

250 kPa (36 psi) (2.50 kgf/cm²)

Rear:

280 kPa (41 psi) (2.80 kgf/cm²)

90–210 kg (198–463 lb):

Front:

250 kPa (36 psi) (2.50 kgf/cm²)

Rear:

280 kPa (41 psi) (2.80 kgf/cm²)

Maximum load*:

210 kg (463 lb)

* Total weight of rider, passenger, car-

go and accessories

U12C21E0.book Page 14 Thursday, October 11, 2007 3:35 PM

«
...
53
54
55
56
57
...
»

Содержание 2008 V-Star 1300



























































































Отзывы:

Нет отзывов

Похожие инструкции для 2008 V-Star 1300

Бренд: LAZER Страницы: 6

PAMPERA 400 - 2006

Бренд: GAS GAS Страницы: 70

Pulsar 150 DTS-i

Бренд: Bajaj Страницы: 41

Бренд: Honda Страницы: 3

Бренд: GAS GAS Страницы: 150

Бренд: Honda Страницы: 556

Бренд: X-lite Страницы: 96

Virago XV1100K(C)

Бренд: Yamaha Страницы: 111

Бренд: Yamaha Страницы: 101

CYBERCHARGER 50002

Бренд: Ciro Страницы: 3

Бренд: R&G Страницы: 6

Бренд: Shad Страницы: 2

Бренд: Gilera Страницы: 118

Бренд: hepco & becker Страницы: 3

Бренд: KEDO Страницы: 3

Бренд: hepco & becker Страницы: 4

Бренд: hepco & becker Страницы: 2

RST mille FUTURA

Бренд: APRILIA Страницы: 160

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды