manualshive.com logo in svg

Yamaha 2007 YZF-R6W, Руководство пользователя

Поделиться
Скачать
Yamaha 2007 YZF-R6W Скачать руководство пользователя страница 40

INSTRUMENT AND CONTROL FUNCTIONS

3-24

3

Compression damping force (for slow
compression damping)
To increase the compression damping
force and thereby harden the compres-
sion damping, turn the adjusting screw
in direction (a). To decrease the com-
pression damping force and thereby
soften the compression damping, turn
the adjusting screw in direction (b).

NOTE:

Although the total number of clicks of a
damping force adjusting mechanism
may not exactly match the above spec-
ifications due to small differences in
production, the actual number of clicks
always represents the entire adjusting
range. To obtain a precise adjustment,
it would be advisable to check the num-
ber of clicks of each damping force ad-
justing mechanism and to modify the
specifications as necessary.

WARNING

EWA10220

This shock absorber contains highly
pressurized nitrogen gas. For prop-
er handling, read and understand
the following information before
handling the shock absorber. The
manufacturer cannot be held re-
sponsible for property damage or
personal injury that may result from
improper handling.

●

Do not tamper with or attempt to
open the gas cylinder.

●

Do not subject the shock ab-
sorber to an open flame or other
high heat sources, otherwise it
may explode due to excessive
gas pressure.

●

Do not deform or damage the
gas cylinder in any way, as this
will result in poor damping per-
formance.

●

Always have a Yamaha dealer
service the shock absorber.

Compression damping setting (for 
fast compression damping):

Minimum (soft):

16 click(s) in direction (b)*

Standard:

7 click(s) in direction (b)*

Maximum (hard):

1 click(s) in direction (b)*

* With the adjusting screw fully turned 

in direction (a)

Compression damping setting (for 
slow compression damping):

Minimum (soft):

24 click(s) in direction (b)*

Standard:

15 click(s) in direction (b)*

Maximum (hard):

1 click(s) in direction (b)*

* With the adjusting screw fully turned 

in direction (a)

U2C021E0.book  Page 24  Friday, July 7, 2006  4:11 PM

Содержание 2007 YZF-R6W











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды