Yamaha 2006 YZFR6V, Руководство по обслуживанию

Страница: 361 / 444

FUEL INJECTION SYSTEM
8-38
Communication error with the meter
39
Primary injector
(open circuit) Primary injector:
open circuit detected.
Able
(depending
on the
number of
faulty cylin-
ders) Able
(depending
on the
number of
faulty cylin-
ders)
40
Secondary injector
(open circuit) Secondary injector:
open circuit detected.
Able
(depending
on the
number of
faulty cylin-
ders) Able
(depending
on the
number of
faulty cylin-
ders)
41
Lean angle sensor
(open or short-circuit) Lean angle sensor:
open or short circuit detected.
Unable Unable
42
Speed sensor
No normal signals are received
from the speed sensor.
Able Able
Neutral switch
Neutral switch:
open or short circuit detected.
43
Fuel system voltage
(monitoring voltage) Power supply to the injectors and
the fuel pump is not normal.
Able Able
44
Error in writing the
amount of CO adjust-
ment on EEPROM An error is detected while reading
or writing on EEPROM (CO ad-
justment value).
Able Able
46
Vehicle system power
supply
(monitoring voltage)
Power supply is not normal. Able Able
50
ECU internal malfunc-
tion
ECU memory is faulty. (When this
malfunction is detected in the
ECU, the fault code number might
not appear on the meter.)
Able/Un-
able Able/Un-
able
59
Throttle position sen-
sor (for throttle cable
pulley)
(open or short cir-
cuit/loose connection)
Throttle position sensor (for throt-
tle cable pulley):
open or short circuit detected.
Throttle position sensor (for throt-
tle cable pulley) coupler connec-
tion is loose.
Able/Un-
able Able/Un-
able
60 Throttle servo motor
Throttle servo motor:
open or short circuit detected.
Motor is defective or ECU internal
malfunction.
Able/Un-
able Able/Un-
able
Fault
code No.
Item Symptom
Able/un-
able to start
Able/un-
able to
drive
Er-1
ECU internal malfunc-
tion
(output signal error)
No signals are received from the
ECU.
Unable Unable
Fault
code No.
Item Symptom
Able/un-
able to start
Able/un-
able to
drive