Yamaha 2006 YZFR6V, Руководство по обслуживанию

Страница: 19 / 444

FEATURES
1-10
• Display brightness:
This function allows you to adjust the bright-
ness of the displays and tachometer to suit the
outside lighting conditions.
• Shift timing indicator light activity:
This function allows you to choose whether or
not the indicator light should be activated and
whether it should flash or stay on when activat-
ed.
• Shift timing indicator light activation:
This function allows you to select the engine
speed at which the indicator light will be acti-
vated.
• Shift timing indicator light deactivation:
This function allows you to select the engine
speed at which the indicator light will be deac-
tivated.
• Shift timing indicator light brightness:
This function allows you to adjust the bright-
ness of the indicator light to suit your prefer-
ence.
NOTE:
In this mode, the odometer/trip meter/fuel re-
serve trip meter/stopwatch display shows the
current setting for each function (except the shift
timing indicator light activity function).
To adjust the brightness of the multi-function
meter displays and tachometer:
1. Turn the key to “OFF”.
2. Push and hold the “SELECT” button.
3. Turn the key to “ON”, and then release the
“SELECT” button after five seconds.
4. Push the “RESET” button to select the de-
sired brightness level.
5. Push the “SELECT” button to confirm the se-
lected brightness level. The control mode
changes to the shift timing indicator light ac-
tivity function.
To set the shift timing indicator light activity func-
tion:
1. Push the “RESET” button to select one of the
following indicator light activity settings:
• The indicator light will stay on when activated.
(This setting is selected when the indicator
light stays on.)
• The indicator light will flash when activated.
(This setting is selected when the indicator
light flashes four times per second.)
• The indicator light is deactivated; in other
words, it will not come on or flash. (This set-
ting is selected when the indicator light flash-
es once every two seconds.)
2. Push the “SELECT” button to confirm the se-
lected indicator light activity. The control
mode changes to the shift timing indicator
light activation function.
To set the shift timing indicator light activation
function:
NOTE:
The shift timing indicator light activation function
can be set between 10000 r/min and 18000
r/min. From 10000 r/min to 13000 r/min, the indi-
cator light can be set in increments of 500 r/min.
From 13000 r/min to 18000 r/min, the indicator
light can be set in increments of 200 r/min.
1. Push the “RESET” button to select the de-
sired engine speed for activating the indicator
light.
2. Push the “SELECT” button to confirm the se-
lected engine speed. The control mode
changes to the shift timing indicator light de-
activation function.
To set the shift timing indicator light deactivation
function:
NOTE:
• The shift timing indicator light deactivation
function can be set between 10000 r/min and
18000 r/min. From 10000 r/min to 13000 r/min,
the indicator light can be set in increments of
500 r/min. From 13000 r/min to 18000 r/min,
the indicator light can be set in increments of
200 r/min.
• Be sure to set the deactivation function to a
higher engine speed than for the activation
function, otherwise the shift timing indicator
light will remain deactivated.
1. Push the “RESET” button to select the de-
sired engine speed for deactivating the indi-
cator light.
2. Push the “SELECT” button to confirm the se-
lected engine speed. The control mode
changes to the shift timing indicator light
brightness function.