3 - 9
CHK
ADJ
ADJUSTING THE STARTER CABLE/
CHECKING THE SPARK PLUG
3. Install:
• console
• passenger seat
• driver seat
Refer to “SEATS, ENCLOSURE, HOOD
AND CARGO BED” in chapter 8.
CHECKING THE SPARK PLUG
1. Lift the cargo bed up.
2. Remove:
• spark plug
3. Check:
• spark plug type
Incorrect
→
Replace.
4. Check:
• electrode
1
Wear/damage
→
Replace.
• insulator
2
Abnormal color
→
Replace.
Normal color is a medium-to-light tan color.
5. Clean the spark plug with a spark plug
cleaner or wire brush.
Standard spark plug
DPR8EA-9/NGK
6. Measure:
• spark plug gap
a
Use a wire gauge or thickness gauge.
Out of specification
→
Regap.
7. Install:
• spark plug
NOTE:
Before installing a spark plug, clean the gasket
surface and plug surface.
8. Lower the cargo bed.
Spark plug gap
0.8
~
0.9 mm (0.031
~
0.035 in)
T
R
.
.
18 Nm (1.8 m
·
kg, 13 ft
·
lb)
www.midwestmanuals.com