Yamaha 2001 V Star XVS1100AM, Руководство пользователя

Страница: 39 / 108

INSTRUMENT AND CONTROL FUNCTIONS
3-16
3
5. Turn the adjusting ring in
direction
a
to increase spring pre-
load and in direction
b
to de-
crease spring preload.
6. Make sure that the appropriate
notch in the adjusting ring is
aligned with the position indicator
on the rear shock absorber.
CI-15E
NOTE:
@
When adjusting, use the special
wrench which is included in the owner’s
tool kit.
@
7. Install the mud guard and ignitor
unit panel.
NOTE:
@
When installing a quick fastener, push
its pin back so that it will protrude from
the fastener head, then insert the fas-
tener and push the protruding pin in un-
til it is flush with the fastener head.
@
8. Install the rider seat.
EAU00315
WARNING
@
This shock absorber contains high-
ly pressurized nitrogen gas. Read
and understand the following infor-
mation before handling the shock
absorber. The manufacturer cannot
be held responsible for property
damage or personal injury that may
result from improper handling.
●
Do not tamper with or attempt to
open the cylinder assembly.
●
Do not subject the shock ab-
sorber to an open flame or other
high heat source. This may
cause the unit to explode due to
excessive gas pressure.
●
Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.
●
Take your shock absorber to a
Yamaha dealer for any service.
@
1. Adjusting ring
2. Position indicator
3. Special wrench
Soft
Stan-
dard
Hard
Adjusting
position
1 2 3 4 5 6 7
After removal Before installation
E_5ks.book Page 16 Wednesday, August 23, 2000 6:35 PM