Yamaha 2001 V Star XVS1100AM, Руководство пользователя

Страница: 26 / 108

INSTRUMENT AND CONTROL FUNCTIONS
3-3
3
EAU01202
Speedometer
This speedometer is equipped with an
odometer and a trip meter. Pushing the
“TRIP” button will change the display
from one to the other. When set to
“ODO”, it indicates the motorcycle’s to-
tal mileage. When set to “TRIP”, it indi-
cates the motorcycle’s mileage since
the trip meter was last reset. Use the
trip meter to estimate how far you can
ride on a tank of fuel. This information
will enable you to plan fuel stops in the
future.
To reset the trip meter to “0”, push the
“TRIP” button until it displays “TRIP”,
then push it once again and hold it
down for at least one second.
NOTE:
@
This motorcycle does not have a ta-
chometer. However, it is equipped with
an engine speed limiter, which pre-
vents the engine speed from exceed-
ing approximately 6,800 r/min and the
vehicle from exceeding a top riding
speed of approximately 175 km/h.
@
EAU00118
Handlebar switches
EAU00127
Turn signal switch
To signal a right-hand turn, push the
switch to “
”. To signal a left-hand
turn, push the switch to “ ”. Once the
switch is released it will return to the
center position. To cancel the signal,
push the switch in after it has returned
to the center position.
1. Trip button
2. Odometer/Trip meter 1. Turn signal switch
2. Pass switch “
”
3. Dimmer switch
4. Horn switch “
”
E_5ks.book Page 3 Wednesday, August 23, 2000 6:35 PM