
2/2
- Precautions on Use
The following warnings and cautions are very important. Be sure to observe them.
WARNING
- If the material handled come into direct contact with or is splashed over your body, it could be harmful
to the eye or skin. Be sure to check the material handled, and when you work with it, put on a protective
gear (protective mask, glasses, safety gloves, etc.) depending on the degree of danger.
- Some types of grease may contain a carcinogenic material. Read the cautions for handling grease
given by the grease maker carefully when handling the grease.
- Gasoline is a high-volatility material. Do not use gasoline to clean the pump in any case, otherwise it
may cause ignition or explosion.
CAUTION
-
Restriction on handling
The operator or administrator of this pump should not allow those who have no knowledge of the pump
to operate it.
- The maximum supply air pressure of this machine is 0.7 MPa. Using the machine with a supply air
pressure exceeding this limit will lead to death or bodily injury or physical damage due to machine
breakage. Be sure to adjust the supply air pressure below 0.7 MPa.
- After the end of daily work, at night, and on holidays, be sure to shut off the supply air to this machine to
release the gun so as to bleed the internal pressure.
Any secondary accident such as pollution of installation, due to pump operation driven by worn-away
packing or hose without shutting off the supply air, shall be attributable to the user’s responsibility.
- Do not operate the gun lever with the discharge port facing to another person during machine operation
in any case. A direct hit against the human body may result in an accident such as skin damage.
- During machine operation or after completion of movement, be sure to lock the caster brake for locking.
- When replacing any part at maintenance, be sure to stop the air supply to the machine to avoid having
fingers nipped because of a malfunction.