STARTER SYSTEM
PB-2520
EB252
9
2-2 Replacing starter rope
1. Pull out knot (A) from starter grip and untie knot
(A).
2. Pull knot (B) to remove rope from rope reel (C).
3. When installing a new starter rope, singe both
ends of the rope to prevent fraying.
4. Make a knot (D) at end of starter rope and pass
the rope through hole of rope reel, then press the
knot (D) into recess as shown.
5. Pass the other end of starter rope through start-
er case, from inside to outside.
6. Pass starter rope through starter grip (E). Make
a knot as shown.
7. Tighten knot. Push knot into recess (e) of starter
grip.
A
B
C
D
D
E
e