Yale Veracitor GCC040VX, Руководство по эксплуатации

Страница: 89 / 204

Roll Back Feature
If the operator uses the brakes to bring the lift truck, regard-
less of direction selected, to a stop on a grade; then releases
the brake, the Roll Back feature limits and controls the speed
at which the truck rolls backward or forward. This feature is
effective on grades up to 10% and limits the speed to 7.6 cm
(3 in.) per second. (The lift truck may roll faster then 7.6 cm
(3 in.) per second until the Roll Back feature slows it down.)
Reduced Drive Tire Slippage
Electronically controls engine power and clutch pack
engagement during acceleration and reduces the possibility
of drive tire wheel spin.
Inching
WARNING
Inching requires coordinated movement of the inching/
brake pedal and the accelerator or the Foot Directional
Control pedal. New operators must practice this proce-
dure before attempting to handle loads.
Inching is the movement of a lift truck that allows a slow travel
speed while keeping the engine speed high for fast operation
of the lift mechanism.
The inching/brake pedal is used to control the inching oper-
ation. When the inching/brake pedal is initially applied, the
clutch in the transmission is partially disengaged and the
movement of the truck is slow. When the inching/brake pedal
is fully applied, the transmission is completely disengaged
and the brakes are applied. Use the accelerator pedal or Foot
Directional Control pedal to keep the engine speed high while
inching.
A. FAST B. SLOW
Operating Procedures
87