12
Range Test
•
Check Accessories Range
1.) Place each device in the location where you wish to mount them.
Before mounting each device. Please check the system with a simple range test.
Login to your Yale Home App. Select “Tests”, “Device List” then select “Walk Test”.
Hold the devices in the desired location and press the Test/Learn button on the accessories. (see page 9)
If the sensor signal reached the Smart Hub, it will show in the device list on your app.
When you are happy that all your devices can communicate with the Smart Hub, please proceed to mounting the
accessories.
Before you mount a device use the device settings in the Smart Living Home app to bypass the device and disable the
tamper alert. After the device is fully in place don’t forget to disable the bypass.
Smart Hub 2.0 Mounting
The Smart Hub can be free standing, either vertically or horizontally on a flat surface with access to mains socket and
broadband internet router.
It is also suitable for wall mounting. Using the two holes on the mounting back plate, mark the position of the holes. Drill
two holes and fix with the screws and plugs provided. Hook the Smart Hub onto the plate.
1
2
4
(09)
(GB) Setting up - (IT) Configurazione - (DE) Einstellung -
(NO) Tilkobling og montering av alarmsentralen - (SE) Driftsättning -
(DK) Opsætning.
3
a
b
4
Router
NOT INCLUDED
Lear
n
Pow
er
LAN
Batt
ery
<On O
ff>
Batt
ery
<On O
ff>
<On Off>
Lear
n
Pow
er
LAN
Batt
ery
<On O
ff>
OR
a
b
c
Ø5mm
Lear
n
Pow
er
LAN
Batt
ery
<On O
ff>
a
b
