Telephone
Step 2. Turn on main unit
OFF
ON
Step 1. Connection
- Lift cover at rear of unit
(
(
(
(
*
REC
PLAY
REC
PLA
A
AY
AY
Y
Step 3. Red light stops flashing
& stays lit
Step 4. Press keyfob button
Step 5. Red light will turn off
(
(
(
(
*
(
(
(
(
*
Step 6. Set maximum 3 phone
numbers
Connection
/
/
Press to play back pre-recorded message.
System is now ready to go.
Press the Yellow Yale button
(on main unit and keyfob) to
trigger auto-dialling and
message playback via phone.
Input phone numbers
(including area codes)
Set maximum 3 phone numbers
Record voice message
Rear view
4X AAA
A
A Alkaline cell
*Optional backup batteries
AAA 1.5V
?
??
?
??
?
Landline phone
*Optional
Landline
socket
?
Mains
?
(
(
(
Initialisation
Turn on the main unit and wait until the main unit’s red LED light turn off (75 Seconds).
Proceed to next step.
To set up other numbers, use same
sequence but replace with 2 and
3 button at this stage.
(
(
Hold both buttons together,
and speak into microphone in
the main unit for 10 seconds to
record message
Step 7. Recording voice message
Connection
/
/
Press to play back pre-recorded message.
System is now ready to go.
Press the Yellow Yale button
(on main unit and keyfob) to
trigger auto-dialling and
message playback via phone.
Input phone numbers
(including area codes)
Set maximum 3 phone numbers
Record voice message
Rear view
4X AAA
A
A Alkaline cell
*Optional backup batteries
AAA 1.5V
?
??
?
??
?
Landline phone
*Optional
Landline
socket
?
Mains
?
(
(
(
Initialisation
Turn on the main unit and wait until the main unit’s red LED light turn off (75 Seconds).
Proceed to next step.
To set up other numbers, use same
sequence but replace with 2 and
3 button at this stage.
(
(
Hold both buttons together,
and speak into microphone in
the main unit for 10 seconds to
record message
Step 8. Play back voice message
Connection
/
/
Press to play back pre-recorded message.
System is now ready to go.
Press the Yellow Yale button
(on main unit and keyfob) to
trigger auto-dialling and
message playback via phone.
Input phone numbers
(including area codes)
Set maximum 3 phone numbers
Record voice message
Rear view
4X AAA
A
A Alkaline cell
*Optional backup batteries
AAA 1.5V
?
??
?
??
?
Landline phone
*Optional
Landline
socket
?
Mains
?
(
(
(
Initialisation
Turn on the main unit and wait until the main unit’s red LED light turn off (75 Seconds).
Proceed to next step.
To set up other numbers, use same
sequence but replace with 2 and
3 button at this stage.
(
(
Hold both buttons together,
and speak into microphone in
the main unit for 10 seconds to
record message
Repeat step 7 if required.
Set-up is now complete
Telephone
wall outlet
