9
PAIRING MODE
How to pair Aeron actuators when in pairing mode
Enter pairing mode
Pairing request to Actuators
1.
Press CONFIRM
& OPEN for 5s-10s
Note:
It is only necessary to go through the above pairing steps if
the unit has been powered on longer than 5 minutes
1.
Press CONFIRM
& CLOSE for 5s-10s
2.
Pairing (green
light blinking)
2.
Signal sent
successfully (green
light turns on for 1s)
3.
Success
(solid green)
3.
Failed sending
signal, red light
flashes twice
4.
Fail (red light
flash twice)
