10
FACTORY RESET
Single Actuator reset
Group Actuators reset
1.
Press CONFIRM
& NEXT for 5s-10s
1.
Press CONFIRM
& NEXT for 5s-10s
2.
Signal sent
successfully (green
light turns on for 1s)
2.
Signal sent
successfully (green
light turns on for 1s)
3.
Failed sending
signal, red light
flashes twice
3.
Failed sending
signal, red light
flashes twice
If required, a single actuator can be factory reset when it is
not performing correctly.
Ensure the actuator that is to be
reset is selected
then follow the steps below.
If required actuators in a Group can be factory reset when the
actuators are not performing correctly.
Ensure the actuator that
is to be reset is selected
then follow the steps below.
Note:
Single actuator reset can also be performed via
the setting in the app.
