13
80-9510-0088-000 06/19
4600CL Series
Cylindrical Lock
Installation Instructions
For technical support contact Yale
®
at 800.438.1951 x5033 or [email protected]
An ASSA ABLOY Group brand
Copyright © 2018, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc.
All rights reserved. Reproduction in whole or in part without the express written
permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
2
Small Format Interchangeable Core Installation with Lever Already on Lock
6
Cylinders & Miscellaneous
A.
Install tailpiece (Figure 1).
B.
Insert key marked CONTROL and turn clockwise approximately
15 degrees (Figure 2).
C.
Insert core into lever and return key to its original horizontal position
locking core in place (Figure 3).
D.
Withdraw key. Test lockset for correct function with operating key.
E.
Control key has no further use in lockset installation and must be
safeguarded for return to security personnel when installation is
complete.
Figure 1
Tailpiece Installation
Tailpiece
Security Disc
Spacer
(Used with 6 Pin
Cylinder Only)
Small Format Core
6 or 7 Pin Cylinder
CONTROL
KEY
INTERCHANGEABLE CORE
LEVER ASSEMBLY
Figure 2
Control Key 15° Position
Figure 3
Control Key Horizontal Position
3
Small Format Interchangeable Core Removal From Lever
A.
Insert key marked CONTROL and turn clockwise
approximately 15 degrees (Figure 4).
B.
Pull core and tailpiece completely out of lever (Figure 5).
Figure 4
Control Key 15° Position
Figure 5
Core Removal