Page
Index
- 9 -
PC driver and utility installation
Make sure that you first start the software setup from the
provided CD before you connect your Hypersound 156 with
the USB port!
Connection before setting up the device driver will invoke
‘Add New Hardware Wizard’ of Windows 98/98SE. The
Hypersound 156 driver and utility cannot be installed using
the ‘Add New Hardware Wizard’!
1. Insert the provided CD-ROM into the CD-ROM drive. A
dialogue will pop up on the computer screen.
2. Click [Language List] and select your language.
3. Click [Setup Driver] to install the driver.
4. In "Welcome to the Install Shield Wizard for … "window,
click [OK].
5. Click [Next] in the series of windows that appear.
Sometimes a Pop-up window including the “Windows Logo
Test” attention appears. This software does not impair or
destabilize the correct operation of your system. Click
[Continue Anyway].
6. After completing the installation, please check box [Yes,
I want to restart my computer now] and click [Finish] to
restart your computer (Windows 98).
Note:
The Manual CD-ROM will automatically run and allows you to view
manual and install the driver. If this is not the case, then run
the “showmenu.exe” file manually. This file is located in the root
directory of the Manual CD.
Click
Click
Click
Click
Click