Page
Index
- 16 -
a problem of bad encoding or bad source quality.
Remember to close all active programs before encoding to
achieve good quality results.
7, Why do the controls of the Hypersound not work?
Check the position of the Hold switch (ON or OFF). While
positioned at ON, the controls are deactivated.
8. Why is there no sound after pressing the Play button?
-
Make sure the Hold button is on OFF.
-
Check that the files have been stored in the built-in flash
memory. Then press the Play button again.
-
Check the earphone connection or replace with another
one.
-
Check the volume level. The file format may be incorrect.
Only MP3 and WMA files can be played. Make sure the MP3 or
WMA files are not stored in folders or directories.
-
If the problem cannot be solved, talk to your dealer or
customer service.
Description of controls
Play / Pause
Press to turn on; Pressing while in music mode: Pause or Play
F.RWD
Press to jump to previous music track; press and hold to fast
rewind within a track.
Stop /Power off
Press and hold to turn off; press while in music mode: Stop
F.FWD
Press to skip to next track; Press and hold to fast forward within
one track.
Volume
Adjust volume.
EQ
Use EQ button to select a preset equalizer.
Hold
Slide the HOLD switch in the direction of the arrow to hold all
buttons.