Yakima LockNLoad 8000312, Руководство пользователя

Страница: 4 / 8

28-13-004-Rev4 4/8
CHECK LEG TO LEG MEASUREMENTS
With a Tape measure check leg to leg measurements are correct as per the
table. Ensure measurements are taken from the centre of the Legs as shown.
LANDCRUISER 200
LEG TO LEG
MEASUREMENTS
Front Bar Rear Bar
1018 mm 995 mm
PRADO 150
LEG TO LEG
MEASUREMENTS
Front Bar Rear Bar
980 mm 935 mm
PRADO 120
LEG TO LEG
MEASUREMENTS
Front Bar Rear Bar
960 mm 906 mm
10
BAR SLOT COVERS
From the LockNLoad Bar Kit, cut Bar Slot
Covers as per the table and press into underside
channel of each Bar end as shown.
LANDCRUISER 200
BAR SLOT COVER CUT
MEASUREMENTS
Front Bar Rear Bar
230 mm x2 218 mm x2
PRADO 150
BAR SLOT COVER CUT
MEASUREMENTS
Front Bar Rear Bar
210 mm x2 189 mm x2
PRADO 120
BAR SLOT COVER CUT
MEASUREMENTS
Front Bar Rear Bar
200 mm x2 173 mm x2
NOTE - Bar Slot
Covers to be inserted
with flat side visible
9
REMOVE LEG COVERS
Using the keys supplied
in the LockNLoad Leg
Kit (sold separately),
remove all Leg Covers.
7
INSERT LEGS
Slide the pre-assembled Leg
assemblies into the underside channel
of LockNLoad Bars.
If Leg assemblies
will not slide in,
loosen Screws to
increase gap.
8