1032932K-4/15
Unload bicycle
To release the
strap, push the
red button.
• Loosen red knob until
it swings free.
• Set it back into the
wheelrest.
• Push in until it "SNAPS".
Roll back and lift
bike out.
See your lock instructions for installing lock.
Loop cable around frame and insert silver post
into lock housing.
Lower both hoops when not in use.
TO lOcK KING cObRA
Lock King Cobra in between
towers on crossbar when
not in use.
Load bicycle
Pull the strap
through wheel
spokes.
• Insert the strap end behind
the red tab.
•
TIGHTEN the strap by
repeatedly lifting the red tab.
If the wheel is still loose
in the tray slide the strap
in the tray until it rests
against the rim.
TIGHTEN AGAIN.
CLOSE THE STRAP.
Do not let the strap
push against the
valve stem.
If front wheel can
move or if you
cannot swing
the red knob into
the slot, CHECK
WHEEL SETTING.
Refer to step 17.
Open larger hoop.
Place front wheel
in smaller hoop.
Roll bicycle
forward and small
hoop will lever up.
• Pull out red knob.
• Swing it into slot below.
• Tighten Securely.
CENTER TIRE IN
WHEELGRIP.
RATCHET
WILL SLIP
WHEN
TIGHT.
PULL DOWN ON FRONT WHEEL
WHILE TIGHTENING KNOB!
