1034431D-2/21
ReMOve eNd cAP
fROM hOlduP.
Using a flathead screwdriver, remove
the end cap from the HoldUp.
INseRT Plus2 BAse INTO hOlduP.
Insert the Plus2
base into the
HoldUp tube,
aligning holes.
Align
INsTAll MAIN BOlT.
• Insert bolt,
and lock-
washer in
order shown.
• Tighten with
adjustable
wrench.
ROTATe TO uPRIGhT POsITION.
• Pull spring pin to
release base.
• Lift frame.
• Release spring pin. Pin
should snap into place.
75 ft-lbs.
ReMOve fAsTeNeRs.
The fasteners are installed in the trays for shipping
purposes. Remove them to prepare for assembly.