1033606B-4/15
Load largest or heaviest bike first.
•
Pull straps tight,
diagonally over
frame, hook into
place.
• Always load first bike with chain away from vehicle.
• Always use cradles closest to vehicle.
•
Use Wheel Strap to secure rear bike's front wheel to it's frame.
•
Secure loose strap end.
Stabilize the
bike frame in
the cradles.
Arrange
bikes for best
stabilization.
The straps
can be
routed under
the cables.
A yakima TubeTop (see cover
page) may be required to
carry your bike safely.
Failure to load bikes properly
can result in property damage,
personal injury, or death.
wheel strap
Lock bikes (optional).
Pull wire
lock.
Release
pin.
To fold mast down and access the rear:
• Insert the slider pin into
the lock and lock it.
•
Thread security cable around carrier
frame and insert through cable's loop.
•
Thread the cable through each
bike wheel, and all bike frames.
•
Verify that the pin is secure by
pulling on the locked cable.
• Unload the bikes.
• Release safety pin and wire-lock.
Load additional bikes.
• Alternate bike directions to avoid interference.
•
Use Long Strap to secure bikes to carrier’s frame.
•
Secure loose strap end.
long strap
Bikes should be as level as possible to avoid ground
clearance issues and possible ejections.