Yakar 202, Руководство по эксплуатации

Страница: 24 / 28

3.10
Wood pieces must be placed on top of the coal as much as they fit to Central Heating Stove.
3.1 1 Woods are burned with igniting materials (such
as
kindling wood and paper)
3.12 After the woods are ignited, a few more pieces of wood can be added if required and two stove-
shovels of coal are added.
3.13 During the first igniting, Chimney Flap (Figure
-
7), Top Ventilation Inlet (Figure
-
7) and Bottom
Ventilation Flap (Figure -
8) are
kept open.
314 In order to maintain Central Heating Stove burning or sleep at fixed temperature, when full
combustion occurs, in other words, after the coal fully burns, Top Ventilation Inlet (Figure
-
7) is
closed and heat adjustment is done with " Bottom Ventilation Flap".
3.15
When more slowing is desired in the combustion, "Chimney Flap" is also brought closed to
"Closed" position. In models having thermostatic regulator, heat is adjusted automatically with
the condition of having bottom ventilation flap (Figure
-
8) closed.
3.16 In order to accelerate the combustion again or when it is required to add fuel, "Chimney Flap"
and "Bottom Ventilation
Flap" must be brought to "Open
Position".
Figure-6
—
>-Ash Emptying Handle
-
>Ash Screening Handle
-
Ash screening process is done
b moving ash screening handle
back and forth,
-
Ash Emptying process is done
by pulling Ash Emptying Handle
backwards when the stove is
cold.
CHIMNEY FLAP
Figure-7