YAGUD ZF-0301, Руководство пользователя

Страница: 6 / 12

Remote Control Description
Key function description
Speed increase
In the running state, the running speed value can be increased to 0.2mph each time
deceleration
In the running state, the speed value can be reduced to 0.2mph per run
Usage pattern The machine has four operating modes:
Mode 1: Speed mode
Mode 2: Time countdown mode
Mode 3: Distance reverse meter mode
Mode 4: Calorie count mode
Press a button to switch
Start key Start the walking machine Stop key Press the motor to stop running
4
M
STA
RT
STO
P
Attention:
Open the battery rear cover
1
2
1、First place one hand in this groove
and apply force in thisdirection
2、At the same time, place the other
handon the raised patternand apply
force in this direction
Attention:
The plastic sheet must
be removed before use
Note:
The remote control has been paired with the treadmill before delivery and can be used
directly
If you need to pair again, the matching method is as follows: before the treadmill is
powered on, hold down the start button of the remote control (within 10cm of the treadmill
display screen); then, when the treadmill is powered on, the buzzer will ring five times
quickly and the treadmill will enter the standby state, indicating successful pairing. At this
time, you can release the button; If the buzzer does not ring five times quickly after the
treadmill enters the standby state, the pairing fails.