A～F
LED
7
Set cutting length
MANUAL MODE
AUTO MODE
MANUAL MODE
AUTO MODE
Confirm the cutting length
4 digit number
4 digit number
Example of
Display:A 100mm
Numeric value
becomes a large
Numeric value
becomes a small
AUTO/MANUAL
Switching Operation
Lighting Off
Lighting
Tape Feed
Ready to take the
tape after cutting
Remove the tape
Tape Feed
Ready to take the
tape after cutting
Remove the tape
■
Make sure that Blue LED is off.
・
When switching on, it is always MANUAL MODE.
■
Every time pressing START BUTTON, cutting piece is ready one by one.
Set the Tape Length
■
Make sure that cutting length is displayed.
・
Alphabets from A to F show the cutting length in 4 digit.
・
In the case displayed not for cutting length, please press “SELECT
BUTTON” longer. (b and d display small letter)
■
Set the cutting length.
・
Set your needed length by using
＋
/
−
BUTTON.
・
machine can set 6 different cutting length in 3 digital and 1 cutting length
in 4 digital.
・
As needed, set the cutting length as press “SELECT BUTTON” while
displaying A-F.
・
Increased by 1mm if pressing
＋
/
−
BUTTON shorter and press longer for
making so fast.
■
Memorise the setting length after 3 seconds.
■
Setting length will not be memorized if switching off immediately after you
set.
Mode Setting
MANUAL MODE
AUTO MODE
■
Make sure that Blue LED is flashing.
・
When LED is off, press AUTO/MANUAL BUTTON and make sure that
LED is on.
■
Press START BUTTON and cut a tape.
・
After removing the tape ready, another one will come out automatically.