Yaesu WIRES-X TM-400FT5D, Добавление узлов прокси-агента

Страница: 43 / 66

42
④ Connecting to the node or room you have most recently connected
1. If you have previously connected to a node ID or a room ID on the Internet, it
appears in gray at the bottom of the screen.
• Press the PTT switch or touch the ID to connect to the previous connection
destination. When you connect, the connection destination is displayed in
white.
• If connection is unsuccessful, an error message appears and the name flash-
es again.
Ჸ Ჸ
/ 76' 5%12' / 8 5 3 .
; # ' 5 7 6 5 7 4 +
5*+0#)#9#-7 , 3 ; $ ( 6 +
᲻ ; # ' 5 7 6 7 4 +
+ & 6 4 :
⑤ Entering the DTMF ID number (5 digits) of the node or the room
1. Press and hold the [
#
] key on the microphone.
Displays the DTMF ID input screen.
2. Enter the 5-digit DTMF ID.
3. Press the [
#
] key on the microphone to start a connection.
• Once connection is successfully established, “ Connected ” will appear on the LCD.
• If connection is unsuccessful, an error message appears and the screen returns to the DTMF ID input
screen.
• Press the [

] key on the microphone to cancel the DTMF input screen.

FTM-300D
There are five ways to connect to a digital room or a digital node on the Internet.
①
Searching from the node & room lists
(
page 42
)
② Searching the node ID or the room ( page 43 )
③ Selecting the node or the rooms registered in the category list ( page 43 )
④ Connecting to the node or room you have most recently connected ( page 44 )
⑤ Entering the DTMF ID number (5 digits) of the node or the room ( page 44 )
Another C4FM digital transceiver accessing the portable node frequency and using the WIRES-X DG-ID number may
also connect a node or a room. For details, refer to the Operating Manual (WIRES-X Edition) of each transceiver.
① Searching from the node & room lists
1. When the local node is displayed in the upper row, rotate the DIAL knob to se-
lect [ SEARCH & DIRECT ] and press the DIAL knob.
Displays the category list.
JQ1YBG-ND Shinagawa-
SEARCH & DIRECT
2. Rotate the DIAL knob to select [ ALL ] and press the DIAL knob.
Displays the list of accessible nodes and rooms.
• Connection destinations are displayed from the room list and then node list.
• On the connection destination room columns, the number of activities (the
number of nodes connected to each room) appears on the right side.
ALL
SEARCH & DIRECT
C1:
– – – – – – – – – – – – – – – –
C2:
– – – – – – – – – – – – – – – –
C3:
– – – – – – – – – – – – – – – –
C4:
– – – – – – – – – – – – – – – –
CATEGORY
3. Rotate th e DIAL knob to select a node or room and press the DIAL knob to start
connection.
By pressing the PTT switch, you may also establish the connection while talking.
Once connection is successfully established, “ Connected ” will appear on the LCD.
If connection is unsuccessful, an error message appears and the screen returns
to the list of nodes and rooms.
CQ-JAPAN 123
JA1YOE-TKY-ROOM 42
JA1YOE-ROOM-A 31
JA1YOE-ROOM-B 16
CQ-AMERICA 8
CQ-EUROPE 2
[ALL LIST] 999