Yaesu VXA-200, Руководство по эксплуатации

Страница: 39 / 48

VXA-200 A
VIATOR
P
ILOT
II O
PERATING
M
ANUAL
37
Split Operation
The split operation feature allows you to transmit a
call to a Flight Service Station using the
C O M
band
frequencies, while receiving a VOR station (in the
N A V
band). VOR stations equipped with this capa-
bility typically are shown, on navigation charts, with
the voice calling frequency in parenthesis above the
navigation frequency.
Programming a Transmit Frequency
r
Press the
CHANNEL
selector knob, repeatedly
if necessary, to select the VFO mode.
r
Set a
N A V
band (108.000 - 117.975 MHz) fre-
quency using the
CHANNEL
selector knob or
keypad.
r
Press [
F
]
à
[
MW
(
SPL.W
)]. The “
SPL
” icon
will blink, and the transmit frequency will ap-
pear on the display.
r
Now set your radio’s transmit frequency, where
the Flight Service Station will be listening for
calls, using the
CHANNEL
selector knob or key-
pad.
r
Press and hold in the [
MW
(
SPL.W
)] key for 2
seconds to save the transmit frequency and re-
turn to the
N A V
band frequency.
Note : You have now stored the separate transmit fre-
quency, but you have not yet activated the split-fre-
quency function; go on to the next section.
Operating in the Split Mode
r
It is assumed that you have already set the de-
sired VOR station’s frequencies (in the
N A V
band) per the above instructions.
r
Press [
F
]
à
[
7
(
SPL
)] to turn on the “Split”
function. The “
SPL
” icon will appear on the dis-
play.
r
Press and hold in the
PTT
switch to transmit on
the split transmit frequency.
r
Release the
PTT
switch to return to the receive
mode.
r
To disable the “Split” function, press [
F
]
à
[
7
(
SPL
)] again.
Note : A split frequency can be programmed into each
memory channel independently. Set a transmit fre-
quency before programming the memory channel, if
desired. The split function on/off setting can also be
programmed into a memory channel.
VOR N
AVIGATION