Yaesu VX-177 Скачать руководство пользователя

Страница: 87 / 88

1. Changes or modifications to this device not expressly approved by VERTEX

STANDARD could void the user’s authorization to operate this device.

2. This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference including
received, interference that may cause undesired operation.

3. The scanning receiver in this equipment is incapable of tuning, or readily

being altered, by the User to operate within the frequency bands allocated
to the Domestic public Cellular Telecommunications Service in Part 22.

WARNING

: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR

RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES
AND FEDERAL LAW.

DECLARATION BY MANUFACTURER

The Scanner receiver is not a digital scanner and is incapable of being converted
or modified to a digital scanner receiver by any user.

Содержание VX-177

























































































Результаты поиска

Содержание VX-177

Отзывы:

Похожие инструкции для VX-177

Бренды по названию

Популярные бренды

Yaesu VX-177, Руководство по эксплуатации

Результаты поиска

Содержание VX-177

Отзывы:

Похожие инструкции для VX-177

Бренды по названию

Популярные бренды