Yaesu VX-177, Руководство по эксплуатации

Страница: 41 / 88

VX-177 O
PERATING
M
ANUAL
39
S
CANNING
Preferential Memory Scan
The VX-177 also allows you to set up a “Preferential Scan List” of channels which you can
“flag” within the memory system. These channels are designated by a blinking “ ” icon
when you have selected them, one by one, for the Preferential Scan List.
When you initiate memory scanning, beginning on a channel with the blinking “ ” icon
appended, only those channels bearing the blinking “u” icon will be scanned. If you ini-
tiate scanning on a channel which does not have the blinking “ ” icon appended, you will
scan all channels including those with the blinking “ ” icon appended.
Here is the procedure for setting up and using the Preferential Scan List:
1.
Recall the Memory Channel which you wish to add to the Preferential Scan List.
2. Press the [ F
] key, then press the [
MR
(
SKIP
)] key to enter the “Skip” channel-selec-
tion mode.
3. Rotate the DIAL knob so as to select “
ONLY
.”
4. When you have made your selection, press the PTT switch to
save the setting and exit to normal operation.
5. To remove a channel from the Preferential Scan List, just repeat the above procedure,
rotating the
DIAL
knob to select “
OFF
” in step 3 above.
To initiate Preferential Memory Scan:
1.
Press the [ F
] key, then press the [
0
(
SET
)] key to enter the Set mode.
2. Rotate the
DIAL
knob to select Set Mode Item 39:
SCN MD
.
3. Press the [
F
] key momentarily to enable adjustment of this Set
Mode Item.
4. Rotate the
DIAL
knob so as to select “
ONLY
.”
5. Press the
PTT
switch to save the setting and exit to normal op-
eration.
6. Now, press and hold in either the [
(
MHz
)] or [ (
MHz
)] key
for one second to initiate the Preferential Memory Scan. Only the channels which have
the blinking “
” icon appended to the channel number will be scanned.
7. To cancel the Preferential Memory Scan, just repeat the above procedure, rotating the
DIAL knob to select “
MEM
” in step 4 above
M
EMORY
S
CANNING