18
Memory Operation
Naming a Memory Channel
You may wish to append an alphanumeric “Tag” (label) to each memory, to aid in
recollection of the channel’s use (such as club name, etc.).
1. Recall the memory channel on which you wish to append a label.
2. Press and hold the [
MHz
(
SETUP
)] key to enter the
Set mode.
3. Rotate the
DIAL
knob to select “
MEM NAME 26
”.
4. Press the [
MHz
(
SETUP
)] key momentarily to en-
able programming of the nametag.
5. Use the numeric keypad or
DIAL
knob to input the
characters.
Press the [
V/M
(
MW
)] key to move to the next
character.
• Inputting characters
Example quickly Pressing the [
2
] key, each
time switches the following characters:
a → b → c → A → B → C → a →
Example Rotating the
DIAL
switches the fol-
lowing characters.
•••
A - Z
(symbol)
a - z
(symbol)
0 - 9
(symbol)
•••
• Moving the cursor, deleting the input character
[
V/M
(
MW
)] key: Moves the cursor to the right
[
BAND
(
SQL
)] key: Moves the cursor to the right
Pressing and holding the [
GM
(
AMS
)] key: Erases all characters after the cursor
6. Repeat step 5 to program the remaining letters, numbers, or symbols of the desired
label. A total of 8 characters may be used in the creation of a label.
7. When you have programmed a label that is under 8 characters, press the [
MHz
(
SET-
UP
)] key to confirm the label.
8. When you have completed the creation of the label, then press and hold the [
V/M
(
MW
)]
key to save the label and exit.
While operating in the Memory Recall mode, press
the [
MHz
(
SETUP
)] key to toggle the display between
indication of the frequency, and indication of the
Alpha/Numeric label.
