Yaesu FTM-400DR/DE, Техническое дополнение

Страница: 9 / 59

FTM-400DR/DE Technical Supplement
Alignment
ALIGNMENT-4
TX Power Adjustment
1. Press the [
P1
] key of the Microphone to set the
alignment menu Item to " Adj 02 PWR ".
2. Set the transceiver frequency to 440.050 MHz.
3. Press the [
F
(
MW
)
] key, then press the [
Tx PWR
]
to select " LO ".
4. Press the [
F
(
MW
)
] key.
5. Press the PTT switch to activate the transmitter,
adjust the
DIAL
knob (Band B) so that RF Power
Meter reading is 5.3 W (± 0.5 W).
6. Press the [
P2
] key of the Microphone to set the
alignment menu Item to " Adj 02 DRV ".
7. Adjust the
DIAL
knob (Band B) to set the DRV
to " 9AH ".
8. Press the [
P2
] key of the Microphone to set the
alignment menu Item to " Adj 02 PWR ".
9. Press the [
F
(
MW
)
] key, then press the [
Tx PWR
]
to select " MD ".
10. Press the [
F
(
MW
)
] key.
11. Press the PTT switch to activate the transmitter,
adjust the
DIAL
knob (Band B) so that RF Power
Meter reading is 20 W (± 0.5 W).
12. Press the [
P2
] key of the Microphone to set the
alignment menu Item to " Adj 02 DRV ".
13. Adjust the
DIAL
knob (Band B) to set the DRV
to " B0H ".
14. Press the [
P2
] key of the Microphone to set the
alignment menu Item to " Adj 02 PWR ".
15. Press the [
F
(
MW
) ] key, then press the [
Tx PWR
]
to select " HI ".
16. Press the [
F
(
MW
) ] key.
17. Press the PTT switch to activate the transmitter,
adjust the DIAL knob (Band B) so that RF Power
Meter reading is 50 W (± 0.5 W).
18. Press the [
P2
] key of the Microphone to set the
alignment menu Item to " Adj 02 DRV ".
19. Adjust the DIAL knob (Band B) to set the DRV
to " D0H ".
20. Press the [
P2
] key of the Microphone to set the
alignment menu Item to " Adj 02 PWR ".
21. Set the transceiver frequency to 146.050 MHz.
22. Press the [
F
(
MW
) ] key, then press the [
Tx PWR
]
to select " LO ".
23. Press the [
F
(
MW
) ] key.
24. Press the PTT switch to activate the transmitter,
adjust the DIAL knob (Band B) so that RF Power
Meter reading is 5 W (± 0.5 W).
25. Press the [
P2
] key of the Microphone to set the
alignment menu Item to " Adj 02 DRV ".
26. Adjust the DIAL knob (Band B) to set the DRV
to " CFH ".
27. Press the [
P2
] key of the Microphone to set the
alignment menu Item to " Adj 02 PWR ".
28. Press the [
F
(
MW
) ] key, then press the [
Tx PWR
]
to select " MD ".
29. Press the [
F
(
MW
) ] key.
30. Press the PTT switch to activate the transmitter,
adjust the DIAL knob (Band B) so that RF Power
Meter reading is 20 W (± 0.5 W).
31. Press the [
P2
] key of the Microphone to set the
alignment menu Item to " Adj 02 DRV ".
32. Adjust the DIAL knob (Band B) to set the DRV
to " DAH ".
33. Press the [
P2
] key of the Microphone to set the
alignment menu Item to " Adj 02 PWR ".
34. Press the [
F
(
MW
) ] key, then press the [
Tx PWR
]
to select " HI ".
35. Press the [
F
(
MW
) ] key.
36. Press the PTT switch to activate the transmitter,
adjust the DIAL knob (Band B) so that RF Power
Meter reading is 50 W (± 0.5 W).
37. Press the [
P2
] key of the Microphone to set the
alignment menu Item to " Adj 02 DRV ".
38. Adjust the DIAL knob (Band B) to set the DRV
to " EFH ".
39. Press the [
P2
] key of the Microphone to set the
alignment menu Item to " Adj 02 PWR ".