Yaesu FTM-400DR/DE, Техническое дополнение

Страница: 12 / 59

FTM-400DR/DE Technical Supplement
Alignment
ALIGNMENT-7
TX Deviation
1. Inject a 1 kHz, 80 mV signal from the Audio
Generator.
2. Set the transceiver frequency to 440.050 MHz.
3. Press the [
F
(
MW
)
] key, then press the [
Tx PWR
]
to select " LO ".
4. Press the [
F
(
MW
)
] key.
5. Press the [
P1
] key of the Microphone to set the
alignment menu Item to " Adj 03 DEV ".
6. Press the
PTT
switch to activate the transmitter,
adjust the
DIAL
knob (Band B) so that the Devi-
ation Meter reading is 4.5 kHz (±0.2 kHz) (USA
Version: 4.2 kHz (±0.2 kHz).
7. Set the transceiver frequency to 146.050 MHz.
8. Press the [
F
(
MW
)
] key, then press the [
Tx PWR
]
to select " LO ".
9. Press the
PTT
switch to activate the transmitter,
adjust the
DIAL
knob (Band B) so that the Devi-
ationMeter reading is 4.5 kHz (±0.2 kHz) (USA
Version: 4.2 kHz (±0.2 kHz).
Digital TX Deviation
1. Inject a 1 kHz, 80 mV signal from the Audio
Generator.
2. Set the transceiver frequency to 440.050 MHz.
3. Press the [
F
(
MW
)
] key, then press the [
Tx PWR
]
to select " LO ".
4. Press the [
F
(
MW
)
] key.
5. Press the [
P1
] key of the Microphone to set the
alignment menu Item to " Adj 04 MOD ".
6. Press the [
P2
] key of the Microphone to set the
alignment menu Item to " Adj 04 MIX ".
7. Press the
PTT
switch to activate the transmitter,
adjust the
DIAL
knob (Band B) so that the Devi-
ation Meter reading is 4.5 kHz (±0.2 kHz).
8. Set the transceiver frequency to 146.050 MHz.
9. Press the [
F
(
MW
)
] key, then press the [
Tx PWR
]
to select " LO ".
10. Press the [
F
(
MW
)
] key.
11. Press the
PTT
switch to activate the transmitter,
adjust the
DIAL
knob (Band B) so that the Devi-
ationMeter reading is 4.5 kHz (±0.2 kHz) (USA
Version: 4.2 kHz (±0.2 kHz).
DCS TX Deviation
1. Set the transceiver frequency to 440.050 MHz.
2. Press the [
F
(
MW
)
] key, then press the [
Tx PWR
]
to select " LO ".
3. Press the [
SQL
] to select "
D-TRX ".
4. Press the [
F
(
MW
)
] key.
5. Press the [
P1
] key of the Microphone to set the
alignment menu Item to " Adj 05 DCS ".
6. Press the
PTT
switch to activate the transmitter,
adjust the
DIAL
knob (Band B) so that the Devi-
ation Meter reading is 0.60 kHz ~ 0.80 kHz.
7. Set the transceiver frequency to 146.050 MHz.
8. Press the [
F
(
MW
)
] key, then press the [
Tx PWR
]
to select " LO ".
9. Press the [
F
(
MW
)
] key.
10. Press the
PTT
switch to activate the transmitter,
adjust the
DIAL
knob (Band B) so that the Devi-
ation Meter reading is 0.60 kHz ~ 0.80 kHz.
CTCSS TX Deviation
1. Set the transceiver frequency to 440.050 MHz.
2. Press the [
F
(
MW
)
] key, then press the [
Tx PWR
]
to select " LO ".
3. Press the [
SQL
] to select "
T-TRX ".
4. Press the [
F
(
MW
)
] key.
5. Press the [
P1
] key of the Microphone to set the
alignment menu Item to " Adj 06 CTC ".
6. Press the
PTT
switch to activate the transmitter,
adjust the
DIAL
knob (Band B) so that the Devi-
ation Meter reading is 0.65 kHz ~ 0.75 kHz.
7. Set the transceiver frequency to 146.050 MHz.
8. Press the [
F
(
MW
)
] key, then press the [
Tx PWR
]
to select " LO ".
9. Press the [
F
(
MW
)
] key.
10. Press the
PTT
switch to activate the transmitter,
adjust the
DIAL
knob (Band B) so that the Devi-
ation Meter reading is 0.65 kHz ~ 0.75 kHz.