FTM-350R O
PERATING
M
ANUAL
15
CTCSS/DCS/EPCS O
PERATION
EPCS O
PERATION
The EPCS (Enhanced Paging & Code Squelch) feature allows you to place a call to a
specific station (Paging), and to receive calls of your choice directed only to you (Code
Squelch).
The EPCS feature use two pairs of (alternately switched) CTCSS tones which are stored in
the pager memories. Basically, your receiver remains silent until it receives the CTCSS
tone pair that matches those stored in the receiving pager memory.
1. Store the CTCSS tone pair via Set Mode item “
J04 PAGER CODE
” in the “
SIGNAL-
ING
” group. Sub menu “
1: RX
” sets the first tone of the receiving CTCSS tone pair,
and the second tone of the receiving CTCSS tone pair is set to Sub menu “
2: RX
”. In a
similar manner, set the transmitting CTCSS tone pair in the Sub menu “
3: RX
” and “
4:
RX
”.
2. Press and hold in the [
F
] key for two seconds to replaces the [
SMART FUNCTION
]
key’s category to “
SQL
”.
3. Press the [
TYPE
] key repeatedly, until the “
PAGER
” notation appears; this activates
the EPCS feature.
4. To finish the EPCS operation, press the [
TYPE
] key repeatedly, until the “
OFF
” nota-
tion appears.
You may customize the EPCS operation so that a ringing “bell” sounds alerts you taht a call
is coming in via Set Mode item “
J01 BELL RINGER
” in the “
SIGNALING
” group. See
page 40 for details.
FCC ID: K6620335X40
IC: 511B-20335X40
