Yaesu FTM-300DR, Руководство по эксплуатации

Страница: 44 / 80

42
Recalling the Home Channels
1. Press the [ P2 ]* key on the microphone.
* This is the factory setting. This function can also be
assigned to the [ P3 ] or [ P4 ] key (see page 9).
“ HOME ” and the home channel frequency of the cur-
rently selected band appears on the LCD.
2. Press the [ P2 ] key again, to return to the previous fre-
quency.
While recalling the home channel, rotate the DIAL knob to transfer the home channel
frequency to the operating band VFO.
Changing the Home Channel Frequency
1. Set the frequency and the operating mode to be stored as a home channel.
2. Press the [
F(SETUP) ] key.
Or press and hold the [ V/M(MW) ] key and proceed to
step 5.
3. Rotate the DIAL knob to select [ ENTER FREQUEN-
CY ] or [ MEMORY CH ], then press the DIAL knob.
The frequency input screen or memory channel input
screen appears.
4. Rotate the DIAL knob to select [ MEMORY CH LIST ],
then press the DIAL knob.
The memory channel list appears.
5. Rotate the DIAL knob to select [ HOM ] displayed at the
top of the memory channel list.
6. Press and hold the [ V/M(MW) ] key or press the DIAL
knob to display a popup. Make sure that [ WRITE ] is
highlighted and press the DIAL knob.
Confirmation screen “ OVER WRITE? ” is displayed.
7. Rotate the DIAL knob to select [ OK ], then press the
DIAL knob.
8. The contents of the home channel are changed and
the previous screen returns.
041 DIGITAL
433.100
433.200
433.300 JA1YOE
022 433.620 FTM-300D
021 433.300 YAESU
033
MEMORY CH LIST
003
‐ ‐ ‐
.
‐ ‐ ‐ ‐ ‐
ｰ ｰ ｰ ｰ
001
‐ ‐ ‐
.
‐ ‐ ‐ ‐ ‐
ｰ ｰ ｰ ｰ
HOM 145.000
002
‐ ‐ ‐
.
‐ ‐ ‐ ‐ ‐
ｰ ｰ ｰ ｰ
MEMORY CH LIST