19
New Operating Concepts E
2
O-II (Easy to Operate-II)
Function pop-up screen
....................................................... page 26
Frequently used functions can be easily selected on the function pop-up screen.
The following four functions can be operated from the function pop-up screen.
z
ENTER FREQUENCY/MEMORY CH
z
FUNCTION
REV
Transmit and the receive frequenciec are temporarily
reversed
DTMF/DTMF MEMORY
DTMF registration and transmission
LOG LIST
Display of received messages and images
TXPWR
Transmit power output
SQ-TYP
Change squelch type
CODE/TONE
Change DCS code or CTCSS tone frequency
REC
Perform record and playback operations
z
APRS FUNCTION
Operations related to APRS operation
z
FVS-2
Recording and playback operations using the optional voice guide unit FVS-2
Memory Auto Grouping (MAG) function
............................. page 37
Memory channels of the same frequency band can be easily recalled automatically as
a group.
Each time the [
BAND
] key is pressed during memory mode operation, the band
switches in the following order: ALL → AIR → VHF → UHF → GEN → GRP. Only
memory channels of that frequency band can be automatically grouped and recalled.
Multi-Channel Standby (MCS) function
............................... page 38
This is a convenient function that can automatically monitor multiple memory
channels registered in each group of the MAG function (except for M-ALL).
When a signal is received, MAG group watch pauses on that channel until 5 seconds
after receiving is completed, so communications may be established. When there
is no transmit or receive operation for about 5 seconds, the watch of the memory
channels registered to the same group starts again.
Improvement of operation system
All operating systems such as key layout and control logic have been examined in
detail, improved and optimized. Functions can be installed and enabled intuitively.
Easy and stress-free operation is unprecedented.
