3
GM Operation
1. Tune to the frequency used by the group that you would like to communicate with.
•
If you only want to check your group location information, press and hold the [GM]
key and set the send and receive DG-ID numbers to the same numbers except “00”
at all the partner stations.
•
The frequency cannot be changed while the GM function is operating.
2. Press the [
GM
] key.
•
The callsign and signal strength of stations (up to 24) operating in the DN mode
and those with their GM function in operation, that are within communications
range, will be displayed.
•
Stations within the sphere of communications callsigns are displayed in white
and
are displayed in descending order of signal strength.
•
Each time you press the [
BAND
grp
] key, turn ON/OFF the functions displayed in
order of signal strength (the display of signal strength is also turned OFF).
•
Stations outside the sphere of communications callsigns are displayed in gray.
•
You can communicate in DN mode of C4FM digital by pressing the PTT switch.
JQ1YBF-0AB
JH1YPC-FGH
JA2YSO-789
JA1YOE-123
JA7YWC-022
JA1ZRL-CDE
Selected member
Signal strength
Out of range
In range
