Yaesu FTM-200DE, Инструкция по эксплуатации

Страница: 36 / 57

35
Using the reply function
You can also reply to a station that has sent an APRS message.
1
Rotate the DIAL knob to select the partner station.
Select the partner station to reply to in the APRS MESSAGE LIST screen.
2
Press the [ F menu ] key.
3
Rotate the DIAL knob to select the [ REPLY ], then press the DIAL knob.
The display will change to the APRS MESSAGE EDIT screen.
4
Press the [ F menu ] key.
5
Rotate the
DIAL
knob to select the [
EDIT TEXT
], then press the
DIAL
knob.
The screen for editing text will be displayed.
6
Enter the characters
Enter the message according to the procedure in “ Creating and sending
messages ” (page 33) and “ Use fixed text to write a message ” (page 34).
7
Press the [ F menu ] key.
8
Rotate the DIAL knob to select the [ M-TX ], then press the DIAL knob.
The message will be sent and the display will return to the frequency screen.
y
Message receipt acknowledgment (ACK)
When a message is sent to a specific partner station, an ACK packet (receipt acknowledgment)
will be returned to acknowledge receipt of the message by the partner station. The transmission
process ends with an audio alarm to acknowledge receipt when an ACK packet is returned by
the partner station. When an ACK packet is not returned by the partner station for one minute,
the same message will be resent. The status will change to TX OUT if an ACK packet is not
returned by the partner station even after resending the message 5 times. The remaining
transmission count of the acknowledgment receipt will appear in the APRS MESSAGE LIST
screen as shown below. The remaining transmission count can also be checked by pressing
the DIAL knob to change to the transmit detail screen.
Remaining count display example
1 JA1ZRL- 9 15:36
2 JA6YPC- 7 12:34
3 JA1YOE-13 04:56
4 JQ1YBF- 9 02/14
5 JQ1YBG-14 02/03
6 JA1ZRL- 9 01/28
MESSAGE LIST
Show “ ＊ ” when ACK is received
APRS MESSAGE LIST screen
(display when an acknowledgment is received)