Yaesu FTM-100DE, Инструкция по эксплуатации

Страница: 9 / 15

9
Sending MESSAGE (Massages) or Images (PICT)
Send messages or images using the GM function.
There are the following three ways for sending messages or images.
(1) Creating and sending a new message
(2) Replying to the sender of the checked message or image data
(3) Forwarding the checked message or image data
Sending massages or images
You can send messages or images from the transceiver. Sent data can be viewed by all
stations operating in digital mode on the same frequency.
There are the following three ways for sending messages or images.
(1) Creating and sending a new message
(2) Replying to the sender of the downloaded message or image data
(3) Forwarding the downloaded message or image data
Creating and sending a new message
Create a new message and send.
1
Press and hold for over one second.
Displays the “DG-ID SETUP” screen.
2
Press , ( appears on the left side)
Displays the “LOG SELECT” screen.
3
Rotate the DIAL to select
[GM MESSAGE]
, then
press .
Displays the “GM MESSAGE” screen.
4
Rotate the DIAL to select [NEW] , then press .
5
Press ( appears on the upper side).
Displays the message entry screen.